#include "uart_interface.h"
#include "elog.h"

UartInterface_TypeDef * UartInterface_Init( )
{
    UartInterface_TypeDef *Handle = (UartInterface_TypeDef *)malloc(sizeof(UartInterface_TypeDef));
    if (Handle == NULL)
    {
        return NULL;
    }
 
	// Handle->send_status = 0;
	Handle->interface_type = 0;
 
#if MAX485_ENABLE
	Handle->de485_gpio = NULL;
	Handle->interface_type = 1;
#endif

#if MAX3160_ENABLE
    Handle->de485_gpio = NULL;
	Handle->sel_gpio = NULL;
	Handle->dplx_gpio = NULL;
	Handle->interface_type = 2;
#endif

    return Handle;
}

/**
 * @brief interface->   0:default, 1:485, 2:3160 
 * @param [in] myuart 
 * @param [in] interface 
 * @return int 
 * 
 * @details 
 */
int UartInterface_Setup_Interface_type( UartInterface_TypeDef * interface, Uart_Interface_Type_Typedef interface_type )
{
	interface->interface_type = interface_type;
	return 0;    
}
 
int UartInterface_Setup_Mode_232_485( UartInterface_TypeDef * interface, Uart_RS_Mode_TypeDef mode_232_485 )
{
	interface->mode_232_485 = mode_232_485;
    if (interface->interface_type == 0)
        UartInterface_Set_232( interface);
    if (interface->interface_type == 1)
        UartInterface_Set_485( interface);
    if (interface->interface_type ==2 && interface->mode_232_485 ==Uart_RSMODE_232)
        UartInterface_Set_232( interface);
    if (interface->interface_type ==2 && interface->mode_232_485 ==Uart_RSMODE_485)
        UartInterface_Set_485( interface);

	return 0;          
}
void UartInterface_Set_Sel_GPIO_Pin(UartInterface_TypeDef * interface, GPIO_TypeDef *gpio, uint16_t pin)
{
    if (gpio!=NULL && pin>=0)
    {
#if MAX3160_ENABLE
        interface->sel_gpio = gpio;
        interface->sel_pin = pin;  
#endif     
    }
 
}

void UartInterface_Set_Dplx_GPIO_Pin(UartInterface_TypeDef * interface, GPIO_TypeDef *gpio, uint16_t pin)
{
    if (gpio!=NULL && pin>=0)
    {
#if MAX3160_ENABLE
        interface->dplx_gpio = gpio;
        interface->dplx_pin = pin;   
#endif   
    }
// #if MAX3160_ENABLE
//     interface->dplx_gpio = gpio;
//     interface->dplx_pin = pin;
// #endif
}

void UartInterface_Set_DE485_GPIO_Pin(UartInterface_TypeDef * interface, GPIO_TypeDef *gpio, uint16_t pin)
{
    if (gpio!=NULL && pin>=0)
    {
#if MAX3160_ENABLE
        interface->de485_gpio = gpio;
        interface->de485_pin = pin;   
#endif  
#if MAX485_ENABLE
        interface->de485_gpio = gpio;
        interface->de485_pin = pin;   
#endif               
    }
    // interface->de485_gpio = gpio;
    // interface->de485_pin = pin;
}

void UartInterface_Set_232(UartInterface_TypeDef * interface)
{
    interface->mode_232_485 = Uart_RSMODE_232;
#if MAX3160_ENABLE
    if (interface->sel_gpio != NULL)
        HAL_GPIO_WritePin(interface->dplx_gpio, interface->dplx_pin , DUPLEX_FULL);
    interface->sel = SEL_232;
    if (interface->sel_gpio != NULL)
        HAL_GPIO_WritePin( interface->sel_gpio, interface->sel_pin,  interface->sel );
#endif
//     interface->mode_232_485 = 0;
}

void UartInterface_Set_485(UartInterface_TypeDef * interface)
{
    interface->mode_232_485 = Uart_RSMODE_485;

    // log_i(".......set 485   ");

#if MAX3160_ENABLE
    interface->sel = SEL_485;
    if (interface->sel_gpio != NULL)
        // log_i(".......set 485   set dplx ");
        HAL_GPIO_WritePin(interface->dplx_gpio, interface->dplx_pin , DUPLEX_HALF);
    if (interface->de485_gpio != NULL)
        // log_i(".......set 485   set de ");
        HAL_GPIO_WritePin( interface->de485_gpio, interface->de485_pin, DISABLE_485_SEND );
    if (interface->sel_gpio != NULL)
        // log_i(".......set 485   set sel... ");
        HAL_GPIO_WritePin( interface->sel_gpio, interface->sel_pin, interface->sel );
    // log_i(" UartInterface_Set_485  222  interface->sel : %d   duplex: %d ",interface->sel , HAL_GPIO_ReadPin(interface->dplx_gpio,interface->dplx_pin)  );
#endif

#if MAX485_ENABLE
    if (interface->de485_gpio != NULL)
        // log_i(".......set 485   set de ");
        HAL_GPIO_WritePin( interface->de485_gpio, interface->de485_pin, DISABLE_485_SEND );
 
#endif

}


/**
 * @brief 发送前操作 GPIO
 * @param [in] myuart 
 * @return int 
 * 
 * @details 
 */
int UartInterface_Set_GPIO_For_Transmit( UartInterface_TypeDef * interface )
// int UartInterface_Send_TxPrepare_Callback( UartInterface_TypeDef * interface )
{
#if MAX3160_ENABLE
    if (interface->mode_232_485 == 0) 
    {
        HAL_GPIO_WritePin(interface->dplx_gpio, interface->dplx_pin , DUPLEX_FULL);

    };
    if ( interface->interface_type ==  2 && interface->mode_232_485 == 1 )
    {
        // log_i( " ----   UartInterface_Set_GPIO_For_Transmit " );
        HAL_GPIO_WritePin(interface->dplx_gpio, interface->dplx_pin ,  DUPLEX_FULL);  // 全双工启动发送
        HAL_GPIO_WritePin(interface->de485_gpio, interface->de485_pin, ENABLE_485_SEND);   
        return 0;     
    }    

#endif
#if MAX485_ENABLE
    if (interface->interface_type ==  1)
    {
        HAL_GPIO_WritePin(interface->de485_gpio, interface->de485_pin, ENABLE_485_SEND);           
    }
#endif
    return 0;

// #if MAX3160_ENABLE
//     if (interface->interface_type == 2 && )
//     {
//         switch  (interface->sel)
//         {
//             case SEL_232:
//                 HAL_GPIO_WritePin(interface->dplx_gpio, interface->dplx_pin , DUPLEX_FULL);
//                 // return  __UartInterface_Send(myuart,buf,size);
//                 break;
//             case SEL_485:
//                 log_i(" 485 mode writepin...... ");
//                 HAL_GPIO_WritePin(interface->dplx_gpio, interface->dplx_pin ,  DUPLEX_FULL);    
//                 HAL_GPIO_WritePin( interface->de485_gpio, interface->de485_pin, ENABLE_485_SEND);
//                 // return  __UartInterface_Send(myuart,buf,size);
//                 break;
//             default:
//                 break;
//         }
//     }

// #endif
 
// #if MAX485_ENABLE
//     if (interface->interface_type == 1)
//     {
//         HAL_GPIO_WritePin(interface->dplx_gpio, interface->dplx_pin ,  DUPLEX_FULL);
//         HAL_GPIO_WritePin( interface->de485_gpio, interface->de485_pin, ENABLE_485_SEND);        // return  __Max3160_Send(max3160,buf,size);
//     }
// #endif    
}

/**
 * @brief 发送完成后操作 GPIO
 * @param [in] myuart 
 * @return int 
 * 
 * @details 
 */
// 接收完成，切换到接收状态， 全双工接收
int UartInterface_Set_GPIO_For_Trans_Cplt( UartInterface_TypeDef * interface )
{
    // interface->send_status = 0;
 
#if MAX3160_ENABLE
    if ( interface->interface_type ==  2 && interface->mode_232_485 == 1)
    {
        HAL_GPIO_WritePin(interface->dplx_gpio, interface->dplx_pin ,  DUPLEX_HALF);  // 半双工接收
        HAL_GPIO_WritePin(interface->de485_gpio, interface->de485_pin, DISABLE_485_SEND);   
        return 0;     
    }    
    if (interface->mode_232_485 == 0) return -1;
#endif 
#if MAX485_ENABLE
    if (interface->interface_type ==  1)
    {
        HAL_GPIO_WritePin(interface->de485_gpio, interface->de485_pin, DISABLE_485_SEND);           
        return 0;
    }
    if (interface->mode_232_485 == 0) return -1;
#endif

    return 0;
}